JTS NX-7 Multipurpose Microphone, The NX-7 is designed for optimal warmth and clarity. Its outstanding pick-up pattern and sound quality makes the NX-7 ideal for vocal, drums, guitar amplifiers and other instruments. The dynamic shock mount keeps noise to a remarkable low level. The top-flat grille allows mic, cartridge closer to a sound source to maximize low frequency proximity effect.

Specification.

• Type: Moving Coil Dynamic
• Frequency Response: 50 to 16,500Hz
• Polar Pattern: Cardioid, rotationally symmetrical about microphone axis, uniform with frequency
• Output Level (at 1,000Hz): Open circuit voltage: -72dB*(0.25mV)*0dB=1V/µ bar
• Impedance: Rated impedance is 600 for connection to microphone inputs rated low Z
• Phasing: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Connector: Three-pin professional audio connector (male XLR type)
• Case: Metallic enamel-painted die cast metal with hardened, matte-finished steel grille
• Net Weight: 235 grams (8.3 oz)
• Touch Noise: Super low

JTS NX-8 Vocal Performance Microphone, Based on the success of X-series performance microphones NX-8 re-enhances overall performance, NX-8 provides extended frequency response and dynamic range for more clear and smoother sound. The shock mount keeps handling noise to a extreme low level. Reinforced cartridge and hardened grille make the NX-8 one of the most rugged mics in the professional microphone industry.

Specification.

• Type: Moving Coil Dynamic
• Frequency Response: 50 to 16,500Hz
• Polar Pattern: Cardioid, rotationally symmetrical about microphone axis, uniform with frequency
• Output Level (at 1,000Hz): Open circuit voltage: -72dB*(0.25mV)*0dB=1V/µ bar
• Impedance: Rated impedance is 600 for connection to microphone inputs rated low Z
• Phasing: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Connector: Three-pin professional audio connector (male XLR type)
• Case: Metallic enamel-painted die cast metal with hardened, matte-finished steel grille
• Net Weight: 245 grams (8.6 oz)
• Touch Noise: Super low

JTS NX-8.8 Vocal Condenser Microphone, The NX-8.8 is created for studio quality sound in live performance vocal. Smooth and tailored frequency response provides vividness, accuracy and warmth for vocal. Excellently accurate pick-up pattern provides the best gain-before-feedback. Specially designed filter effectively minimizes breath pop and noise.

Specification.

• Type: Electret condenser
• Frequency Response: 60 to 18,000Hz
• Polar Pattern: Cupcardioid, rotationally symmetrical about microphone axis, uniform with frequency
• Output Level (at 1,000Hz): Open circuit voltage: -70dB*(0.32mV)*0dB=1V/µ bar
• Impedance: 400 30% (at 1,000 Hz)
• Phasing: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Connector: Three-pin professional audio connector (male XLR type)
• Case: Metallic enamel-painted die cast metal with hardened, matte-finished steel grille
• Net Weight: 290 grams (10.2 oz)
• Touch Noise: Super low
• Power Supply: 9-52V phantom power

JTS NXB-8V Handheld Microphones Kit

Features.

• Rugged, lightweight design
• Space available for 8 Handheld Vocal mics.
• Offers great convenience and protection.

JTS NX-2 Bass Instrument Microphone, The NX-2 is born for solving the problem in low frequency sound faced by most microphones. The specially designed frequency response provides excellent output of low end punch on a kick drum. Accurate pick-up pattern ensures the best gain-before-feedback and isolation from other sound sources on or off stage. The NX-2 is optional for kick drum and other bass instruments

Specification.

• Type: Moving Coil Dynamic
• Frequency Response: 20 to 12,000Hz
• Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
• Output Level (at 1,000Hz): Open circuit voltage: -85dB*(0.056mV)*0dB=1V/µ bar
• Impedance: Rated impedance is 600 for connection to microphone inputs rated low Z
• Phasing: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Connector: Three-pin professional audio connector (male XLR type)
• Case: Metallic enamel-painted die cast metal with hardened, matte-finished steel grille
• Adjustable Locking Mount: Integral, dynamic locking, adjustable through 180
• Net Weight: 815 grams (28.75 oz)

JTS NX-2 Bass Instrument Microphone, The NX-2 is born for solving the problem in low frequency sound faced by most microphones. The specially designed frequency response provides excellent output of low end punch on a kick drum. Accurate pick-up pattern ensures the best gain-before-feedback and isolation from other sound sources on or off stage. The NX-2 is optional for kick drum and other bass instruments

Specification.

• Type: Moving Coil Dynamic
• Frequency Response: 20 to 12,000Hz
• Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
• Output Level (at 1,000Hz): Open circuit voltage: -85dB*(0.056mV)*0dB=1V/µ bar
• Impedance: Rated impedance is 600 for connection to microphone inputs rated low Z
• Phasing: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Connector: Three-pin professional audio connector (male XLR type)
• Case: Metallic enamel-painted die cast metal with hardened, matte-finished steel grille
• Adjustable Locking Mount: Integral, dynamic locking, adjustable through 180
• Net Weight: 815 grams (28.75 oz)

JTS NX-6 Instrument Microphone, Designed to have extended frequency response and wide dynamic range, the NX-6 works excellently with drums and various instruments. The outstanding directional character together with effective shock mount prevents disturbance and makes the pick-up concentrated on target sound source. User-friendly locking mount can provides optimal position for pick-up.

Specification.

• Type: Moving Coil Dynamic
• Frequency Response: 60 to 16,000Hz
• Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
• Output Level (at 1,000Hz): Open circuit voltage: -72dB*(0.25mV)*0dB=1V/µ bar
• Impedance: Rated impedance is 600 for connection to microphone inputs rated low Z
• Phasing: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Connector: Three-pin professional audio connector (male XLR type)
• Case: Metallic enamel-painted die cast metal with hardened, matte-finished steel grille
• Adjustable Locking Mount: Integral, dynamic locking, adjustable through 180
• Net Weight: 610 grams (21.51 oz)
• Touch Noise: Super low

JTS NXB-5M Drum & Percussion Microphones Kit

Features.

• Rugged case for damage free.
• 4 Pieces of CX-505 and 1 pc of NX-2 are contained.
• It offers great convenience for performance.

JTS NXB-8M Instrument Microphones Kit

Features.

• Rugged, lightweight design
• Space available for 1 NX-2, 4 NX-6 and 3 handheld mics.
• Offers great convenience and protection.

JTS TM-929 Performance Microphone

Specification.

• Type: Moving Coil Dynamic
• Frequency Response: 50 ~ 15,000 Hz 
• Polar pattern: Cardioid, rotationally symmetrical about microphone axis, uniform with frequency.
• Output Level [at 1,000Hz]: Open circuit voltage?G-75dB*(0.18mV)*0dB = 1V / µ bar
• Output Impedance: Rated impedance 600 for connection to Microphone inputs rated low Z.

JTS CX-07S Multipurpose Microphone, This heavy duty microphone provides excellent sound reproduction. It delivers optimal warmth and clarity. The magnetic reed switch offers great convenience. It is ideal for vocal, drums and other instruments. Advanced design makes CX-07S to a very affordable professional microphone.

Features.

• Outstanding pick-up pattern for excellent isolation and sound presentation.
• Wide dynamic range and frequency response for accurate sound reproduction.
• Non-round design to prevent damage from tumbling.
• Magnetic reed switch with locking feature for silent operation and preventing miss-function.
• Special shock-mount design for suppressing handling noise.

Specification.

• Type: Moving Coil Dynamic
• Polar Pattern: Cardioid
• Frequency Response: 50~16,500Hz
• Sensitivity (at 1,000Hz): -72dB*(0.25mV)*0dB=1V/µ bar
• Impedance: 600 30%
• Net Weight: 245 grams (8.6 oz)

JTS CX-08S Vocal Performance Microphone, Designed for vocal sound reproduction CX-08S provides extended frequency response and wide dynamic range for clear and smooth sound. This heavy duty microphone offers great confidence to singers and it's very affordable price makes it an ideal choice to every singer.#

Features.

• Outstanding pick-up pattern for excellent isolation and sound presentation.
• Wide dynamic range and frequency response for accurate sound reproduction.
• Non-round design to prevent damage from tumbling.
• Magnetic reed switch with locking feature for silent operation and preventing miss-function.
• Special shock-mount design for suppressing handling noise.

Specification.

• Type: Moving Coil Dynamic
• Polar Pattern: Cardioid
• Frequency Response: 50~16,500Hz
• Sensitivity (at 1,000Hz): -72dB*(0.25mV)*0dB=1V/µ bar
• Impedance: 600 30%
• Net Weight: 250grams (8.60 oz)

JTS CM-502 Choir Microphone

Features.

• Wide dynamic range and frequency response for accurate sound reproduction.
• High sensitivity and excellent directional pattern allow effective pick-up.
• Self-contained electronics eliminate need of external power modules.
• Assisted hanger benefits accurate micing.
• Mount plate allows microphone to be fixed on the ceiling or wall.
• Easy installation.
• Durable material allows permanent installation.
• Rusty free finish.

Specification.

• Type: Electrets Condenser
• Frequency Response: 100 ~ 18,000Hz
• Polar Pattern: Supercardioid
• Output Level [at 1,000Hz]: -48dB*(4mV)*0dB = 1V/µ bar
• Impedance: 220 ± 30%
• Max. SPL for 1% THD: 125dB
• Output connector: male XLR (M)
• Standard accessories: Windscreen / Flexible hanger / Mounting plate / Holder

JTS CX-508 Condenser Winds Microphone, CX-508 designed for pick-up of woodwinds and brass. Its flat response with slide peak of high frequency ensures natural and bright reproduction of instruments. CX-508 gives the player confidence and delivers music to audience with power and clarity.

Features.

• Outstanding for saxophone, brass, woodwind instruments.
• Extended frequency response and wide dynamic range for pure and natural sound delivery.
• Excellent shock-mount design for superior isolation from shock and vibration.
• Flexible gooseneck together with adjustable axis for flexibility and permanency position.
• Clamp with elastic grip ensures stable holding instrument without damaging
• Windscreen to prevent pop noise effectively.

Specification.

• Type: Electret Condenser
• Frequency response: 50Hz~18,000Hz
• Polar Pattern: Cardioid
• Sensitivity (at 1,000Hz): -64dB*(0.63mV)*0dB=1V/µ bar
• Impedance: 220 30%
• Max. SPL for 1% THD: 130 grams
• Output connector: XLR(M) type
• Standard accessories: Windscreen

JTS CX-505 Condenser Drum & Percussion Microphone, With a smooth uniform frequency response CX-505 is optimal for drum and percussion instrument. A miniature profile and unique design allow a lowest interference for the performer. Low noise electronic circuitry together with balanced output allows noise isolation. The screw bolt clamp ensures mounting on drum rims, percussion instruments and cymbal stands in horizontal or vertical position securely.

Features.

• Excellent pick-up pattern conveys drum or percussion micing accurately and purely.
• Special shock-mount design for noise isolation.
• Adjustable arm for optional micing position.
• Screw-in clamp ensures stable mounting.
• Windscreen to prevent pop noise effectively.

Specification.

• Type: Electret Condenser
• Frequency Response: 50 to 18,000 Hz
• Polar pattern: Cardioid
• Sensitivity [at 1,000 Hz]: -64 dB*(0.63mV)*0 dB = 1V/ µ bar
• Impedance: 220 30%
• Max. SPL for 1% THD: 130 grams [8.64 oz]
• Output connector: XLR [M] type
• Standard accessories: Windscreen

JTS CX-506 Condenser Drum & Percussion Microphone, CX-506 is designed for drum and percussion micing. Its specially tailored frequency response provides natural reproduction of the instruments. Its polar pattern isolates unwanted sound effectively.

Features.

• Excellent pick-up pattern conveys drum or percussion micing accurately and purely.
• Specially shock-mount design for interference isolation.
• Adjustable shaft for optional micing position.
• Clamp with elastic grip for mic, to hold instrument securely without damaging.
• Windscreen to prevent pop noise effectively.

Specification.

• Type: Electret Condenser
• Frequency response: 50Hz~18,000Hz
• Polar Pattern: Cardioid
• Sensitivity (at 1,000Hz): -64dB(0.63mV)
• Impedance: 220 30%
• Max. SPL for 1% THD: 130 dB
• Output connector: XLR (M) type
• Standard accessories: Windscreen

JTS HB-900 Handheld Transmission Package

Features.

• Hard-shell carry case against microphone damage.
• Convenient and tender design.
• Space available for 1 handheld microphone, 1 interchangeable
  capsule module, 1 mic. holder(MH-56) and 8 ID housing.

JTS GM-5206 Gooseneck Microphone

Features.

• Excellent polar pattern allows outstanding milking.
• High quality gooseneck permits accurate positioning.
• High sensitivity allows sound pick-up smartly.
• Equipped with XLR connector.
• Windscreen for shielding against popping noise.

Specification.

• Type: Electret Condenser
• Frequency Response: 80 ~ 18,000 Hz
• Polar Pattern: Supercardioid
• Output Connector: Balanced XLR [M] type
• Impedance: 220 ± 30 %
• Max. SPL for 1 % THD: 125dB
• Gooseneck length: GM-5206 6 " (152mm),    GM-5212 12 " (305mm),    GM-5218 18" (457mm)

JTS Mh-16 Microphone Holder

Features.

• Allows secure holding of microphone body.
• Fine clip rim can prevent microphone from scratch.
• Recommended for handheld microphone: NX-8.8, NX-9
• Compatible with 5/8"-27 thread stand, or screw on the extra thread adaptor for 3/8"-16 thread stand .

JTS Mh-56 Microphone Holder

Features.

• Offers secure holding of microphone body.
• The fine clip rim can prevent microphone from scratch.
• Recommended for handheld wireless transmitters: Mh-950, MH-850, MH-750, MH-920, MH-8900
• Compatible with 5/8"-27 thread stand, or screw on the extra thread adaptor for 3/8"-16 thread stand .

JTS Mh-36 Microphone Holder

Features.

• Rubber sleeve for secure fit and prevent microphone.
• Recommended for: NX-7, NX-8.
• Compatible with 5/8"-27 thread stand, or screw on the extra thread adaptor for 3/8"-16 thread stand protection.

JTS MS-2L(W) Microphone Display Stand

Features.

• Convenient for microphone display.
• Various display angles for choices.
• Equipped with rubber ring on the top rim for scratch-free.

JTS  DMC-900(-1/-3)(-5)(-6) Detachable Capsule Module

Features.

• Wide dynamic range permits great sound reproduction.
• Hardened grille construction.
• Special shock-mount design allows extremely low touch noise
• Suitable for Mh-950, Mh-920, Mh-930 , Mh-900

Specification.

• Dynamic: DMC-900-3/DMC-900-1
• Frequency response: 50~16,000Hz
• Polar pattern: Hypercardioid
• Output level(1.000Hz): -80 ±3dB
• Impedance: DMC-1:600 ±30%,     DMC-3:750 ±30%

JTS DMC-800(-1/-3)(-5)(-6) Detachable Capsule Module

Features.

• Wide dynamic range permits great sound pick-up.
• Hardened grille construction.
• Special shock-mount design allows low touch noise.
• Dynamic : DMC-800 for Mh-850,Mh-800

Specification.

• Dynamic: DMC-800
• Frequency response: 50~16,000Hz
• Polar pattern: Hypercardioid
• Output level(1.000Hz): -80 ±3dB
• Impedance: 600
• Dynamic: DMC-800-6
• Frequency response: 50~18,000Hz
• Polar pattern: Supercardioid
• Output level(1.000Hz): -80 ±3dB
• Impedance: 800 ±30%

JTS ST-5030 Universal Microphone Stand Base

Features.

• Quick mount die-cast base.
• Magnetic On / Off switch permits minimum noise.
• Special anti-slip pad ensures firm standing and less bounced noise from desk.
• Selectable switch for all kinds of condenser and dynamic gooseneck microphones.

Specification.

• Frequency Preparation: 20 ~ 20,000 Hz
• Power requirement: Battery AA, power 1.5V*2 pcs. / Phantom 48V
• Current Consumption-Stand-by: 0.62mA
• Current Consumption-Stand-Operating: 0.88mA
• Impedance: Rated impedance 600 for connection to microphone inputs rated low Z
• Connector: audio output [XLR 3P Male]
• Weight: 1.22kg

JTS HP-535 Professional Studio Monitor Headphone

Features.

• Audiophile quality close-ear, dynamic stereo headphone.
• Powerful neodymium-ferrous rare earth element magnet system.
• Lightweight copper-clad aluminum voice coil.
• Transparent full-frequency reproduction offers fatigue-free musical enjoyment.
• Large surface radial diaphragm driver unit for clear, high quality sound reproduction.
• Adjustable frame allows the best wearing comfort.
• Flexible ear-flap design ensures comfortable fix.
• Coiled cord permits extended length of 3 m. The cord is terminated with a gold-plated mini stereo phone plug, and with the included gold-plated 1/4" phone adaptor plug is compatible with any audio device.
• Super Thin 40 mm diaphragm driver with neodymium magnet offers wide dynamic range and frequency response.

Specification.

• Drive unit: Super Thin 40mm Diaphragm Drives with Neodymium Magnet
• Frequency response: 20~20,000Hz
• Impedance: 64
• Sensitivity: 104 3 dB /mW at 1,000Hz
• Input connector: Gold-Plated Mini Stereo Phone Plug and 1/4" Phone Adaptor
• Power handling capacity: 1W
• Net weight: 385 grams (13.58 oz)